PA-1004
HIGH PERFORMANCE POWER AMPLIFIER

 

 
POWER AMPLIFIER SPECIFICATIONS
 
  Continuous Power Output  
  Power Output (4 Ohms): 50W x 4
  Power Output (2 Ohms): 100W x 4
  Bridged Power Output (8 Ohms): 100W x 2
  Bridged Power Output (4 Ohms): 200W x 2
  Minimum Speaker Impedance: 2 Ohm
  Power Bandwidth: 5HzÐ25kHz
  Frequency Response (1W / 4 Ohm): 5Hz-80kHz
  Total Harmonic Distortion (at rated power, 4 Ohms): < 0.05%
  Intermodulation Distortion: < 0.05%
  Input Sensitivity: 150mV Ð 4V
  Input Impedance: 22K
  Signal to Noise Ratio (minimum sensitivity 22kHz bandwidth filter):

98dB

  Stereo Separation (2kHz): 80dB
  Damping Factor (20Hz, 4 Ohms): > 150
  Crossovers:
  High Pass 12-250Hz
  Slope 12dB/octave
  Low Pass 45-180Hz
  Slope 12dB/octave
  Bass Boost at 42Hz: Yes
  Auto Bridging: Yes
  Line Output: Yes
  Remote Bass Level Port: Yes
  Protection:
  Short Circuit Protection Yes
  DC Protection Yes
  Thermal Protection Yes
  Thermal Foldback Yes
  Power Source: 12v DC negative ground
(10 Ð 15v allowable)
  Current Consumption:
  with music, 4 Ohms/Channel (avg.) < 20A
  with sine wave, 4 Ohms/Channel < 35A
  at idle < 2.0A
  Dimensions:
  Width 11-1/2"
292.6mm
  Height

2-1/8"
54.4mm

  Length 14-7/8"
377mm
  Approximate Weight: 14 lbs.
6.36 kg.

 

  * Specifications subject to change without notice.